Vector VMC2 H Series Deluxe & Simple Control

Step-by-Step Instructions

On the Computer:  

Step 1.  Click on the download link for the latest Vector Series software. Open the .zip folder, and copy all files to the top level of the USB drive. Eject the USB drive from your computer after the files have been saved.

On the Oven:  

Before you begin:  Record the oven serial number, model, and voltage of the oven.  Navigate to the Oven Info screen, record the Back End (BE) and Front End (FE).

Step 2.  Touch the Menu icon. The menu screen displays.

Step 3.  Touch the Settings icon. The settings screen displays.

Step 4.  Plug the USB drive into the Vector oven's USB port.

NOTE:  You must update the Back End (BE), Front End (FE), and Control Board (CB) to complete the software update.

Step 5. Touch System Backup & Update. Touch the Update System Software setting.

IMPORTANT:  Do not remove the USB drive during the update process.

Step 6.  Touch Update Back End (BE) to update the supporting software between the control board (CB) and interface board (IB). Select the ASBE.bin file. Touch the check mark. The oven loads the selected software. Touch the check mark when the update is complete to restart the oven.

Step 7.  Repeat steps 2 through 5. Touch Update Front End (FE) to update the user interface software. Select the ASFE.bin file. Touch the check mark. The oven loads the selected software. Touch the check mark when the update is complete to restart the oven.

Step 8.  Repeat steps 2 through 5. Touch Update Control Board (CB) to update the control board. Select the file. Touch the check mark. The oven loads the selected software. The oven verifies the file and then updates the CB. Touch the check mark to restart the oven.

Step 9.  On the Oven Info screen, verify your software is the correct versions (BE 19.13.13, FE 13.16.14, and CB 3.0).